FRONT SUSPENSION
Pipe assembly - pump or reservoir to
valve block - ACE - V8
$% 60.60.32
Introduction
CAUTION: The ACE hydraulic system is
extremely sensitive to the ingress of dirt or
debris. The smallest amount could render the
system unserviceable. It is imperative that the
following precautions are taken.
l
l
l
ACE components are thoroughly cleaned
externally before work commences;
all opened pipe and module ports are
capped immediately;
all fluid is stored in and administered
through clean containers.
Remove
1.
To avoid any possibility of swarf ingress,
remove the valve block.
FRONT SUSPENSION, REPAIRS,
6. Remove 2 screws securing lower fan cowl and
remove cowl.
+
Valve block - ACE.
2.
Raise front of vehicle.
WARNING: Do not work on or under a
vehicle supported only by a jack. Always
support the vehicle on safety stands.
3.
Remove RH front road wheel.
4.
5.
Remove 3 screws and remove splash shield.
Remove viscous fan.
COOLING SYSTEM - V8, REPAIRS,
7. Disconnect multiplug from MAF sensor.
Note: Pre 03 MY air intake hose illustrated.
+
Fan - viscous.
8.
9.
Release clips and remove air flow meter from
air cleaner.
Collect 'O' ring.
60-52
REPAIRS
| Categories | Land Rover Defender, Land Rover Discovery II, Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 1999 |
| Download File |
|
| Document Type | Workshop Manual |
| Language | English |
| Product Name | Discovery Series II |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)