TRANSFER BOX - LT230SE
10.
Using tool LRT-41-007, fit new bearing
retaining nut and tighten to 72 Nm (53 lbf.ft).
Do not stake nut at this stage.
CAUTION: Ensure that threads of
replacement nut are 'Patched'.
13.
Using feeler gauges, determine clearance
between high range gear and high/low hub:
l Clearance = 0.05 to 0.15 mm (0.002 to
0.006 in).
14.
15.
If clearance is not as specified, fit new high
range gear and high/low hub and re-check.
Using a suitable drift, stake collar of nut into
differential shaft recess.
11.
12.
Using feeler gauges, determine clearance
between low range gear and high/low hub:
l Clearance = 0.05 to 0.15 mm (0.002 to
0.006 in).
If clearance is not as specified, fit a new low
range gear and high/low hub and re-check.
16.
17.
Using LRT-51-009, fit new rear bearing track
into main casing.
Using a straight edge and feeler gauges, check
that bearing track is recessed 1 mm (0.04 in)
below outer face of main casing.
Apply sealant, Part No. STC 4600 to rear
output shaft housing face.
18.
19.
Position housing to main casing.
41-58
OVERHAUL
| Categories | Land Rover Defender, Land Rover Discovery II, Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 1999 |
| Download File |
|
| Document Type | Workshop Manual |
| Language | English |
| Product Name | Discovery Series II |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)