EMISSION CONTROL - V8
Refit
Air Manifold - RH - Secondary Air
Injection (SAI)
1. Clean air manifold and cylinder head adaptors.
2.
Apply a small amount of engine oil to top of air
manifold union nuts and around air manifold
pipes.
$% 17.25.18
3.
Position air manifold and finger tighten both
union nuts.
Remove
CAUTION: Finger tighten union nuts as far
as possible, damage to air manifold pipes or
adapters may result if this is not done.
1.
Remove SAI control valve.
EMISSION CONTROL - V8,
+
REPAIRS, Control Valve - Secondary Air
Injection (SAI).
2.
Remove heater feed pipe.
HEATING AND VENTILATION,
REPAIRS, Pipe - Heater - Feed.
4. Tighten air manifold unions to 25 Nm (18 lbf.ft).
+
CAUTION: Ensure that air manifold pipes
are not distorted during tightening
operation.
5.
Fit nut securing air manifold to inlet manifold
and tighten to 25 Nm (18 lbf.ft).
4
6. Fit heater feed pipe.
HEATING AND VENTILATION,
+
3
5
REPAIRS, Pipe - Heater - Feed.
Fit SAI control valve.
EMISSION CONTROL - V8,
7.
+
3
REPAIRS, Control Valve - Secondary Air
Injection (SAI).
M17 0223
3.
Disconnect 2 air manifold unions from adapters
in cylinder head.
CAUTION: Take care that air manifold pipes
are not damaged during removal of union
nuts.
4.
5.
Remove nut securing air manifold bracket to
inlet manifold.
Remove air manifold.
REPAIRS 17-2-61
| Categories | Land Rover Defender, Land Rover Discovery II, Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 1999 |
| Download File |
|
| Document Type | Workshop Manual |
| Language | English |
| Product Name | Discovery Series II |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)