AUTOMATIC GEARBOX - ZF4HP22 - 24
12.
Check that the axial end-float is between 0.2 to
0.4 mm. If end-float is not within limits, replace
existing thrust washer, positioned at rear of
intermediate plate, with a suitable thickness
thrust washer to give the required end-float.
Remove DTI gauge and base plate.
Gasket - intermediate plate
$% 44.20.11
13.
14.
Remove
Fit torque converter oil seal.
1.
Remove torque converter oil seal.
AUTOMATIC GEARBOX - ZF4HP22
+
AUTOMATIC GEARBOX - ZF4HP22
+
- 24, REPAIRS, Torque converter and oil
seal.
- 24, REPAIRS, Torque converter and oil
seal.
M44 1344
2.
3.
Remove 12 bolts and plain washers securing
converter housing and intermediate plate to
gearbox casing. Note the position of the 4 bolts
that have sealant applied to the bolt threads.
Hold input shaft in position and carefully lift off
converter housing and intermediate plate as an
assembly. Note the position of the Torrington
race on the forward clutch hub, and the thrust
washer which will stay attached to the
intermediate plate by fluid adhesion.
M44 1345
4.
5.
Remove and discard intermediate plate gasket.
Remove thrust washer from intermediate plate.
REPAIRS
44-39
| Categories | Land Rover Defender, Land Rover Discovery II, Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 1999 |
| Download File |
|
| Document Type | Workshop Manual |
| Language | English |
| Product Name | Discovery Series II |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)