ENGINE MANAGEMENT SYSTEM - V8
4.
Disconnect multiplug from throttle body.
Throttle Body
$% 19.22.45
Remove
5. Position a container below the throttle body to
collect coolant spillage.
6.
7.
8.
Loosen 2 clips securing coolant hoses to
throttle body and release hoses.
Remove 4 bolts securing throttle body to
plenum chamber.
1
Remove throttle body and discard gasket.
Refit
1.
M19 2576A
Clean plenum chamber and throttle body
mating faces.
1.
Loosen 3 clips securing air intake hose, release
air intake hose and position aside.
2. Using a new gasket, position throttle body, fit
bolts and tighten to 9 Nm (7 lbf.ft).
Connect coolant hoses to throttle body and
secure clips.
Connect breather hose to throttle body and
secure clip.
Note: Pre 03 MY air intake hose illustrated.
3.
4.
5.
6.
Connect multiplug to throttle body.
Connect throttle and cruise control cables.
l
+
ENGINE MANAGEMENT SYSTEM
- V8, ADJUSTMENTS, Cable - cruise
control.
l
+
ENGINE MANAGEMENT SYSTEM
- V8, ADJUSTMENTS, Cable - throttle.
Position air intake hose and secure clips.
Top-up cooling system.
2.
Disconnect throttle and cruise control cables
from throttle body.
7.
8.
3.
Loosen clip securing breather hose and release
hose.
18-2-90
REPAIRS
| Categories | Land Rover Defender, Land Rover Discovery II, Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 1999 |
| Download File |
|
| Document Type | Workshop Manual |
| Language | English |
| Product Name | Discovery Series II |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)