DOORS
Latch and motor - tail door
$% 76.37.16
Handle - exterior - rear door
$% 76.58.02
Remove
Remove
1.
2.
Remove tail door trim casing.
DOORS, REPAIRS, Trim casing - tail
1. Remove rear door trim casing.
+
door.
+
DOORS, REPAIRS, Trim casing -
rear door.
2. Carefully release water shedder from door.
Carefully release water shedder from tail door.
3.
Release and remove control rod from exterior
handle and latch.
3. Release control rod from latch.
4. Remove Torx bolt securing exterior handle to
door.
5. Remove exterior handle.
6. Remove control rod from exterior handle.
4.
5.
6.
7.
Release and remove sill button lock rod.
Disconnect multiplug from motor.
Remove release cable from clip.
Remove 3 Torx screws securing latch and
motor assembly to door.
Refit
8.
9.
Remove door latch.
Disconnect release cable from latch.
1. Fit control rod to exterior handle.
2. Position exterior handle and secure to door with
Torx bolt.
Refit
1.
2.
3. Connect control rod to latch.
4. Fit water shedder to door.
5. Fit rear door trim casing.
DOORS, REPAIRS, Trim casing -
rear door.
Connect release cable to latch.
Position door latch and motor assembly, secure
with Torx screws and tighten to 7 Nm (5.2 lbf.ft).
Position control rod and connect to exterior
handle and latch.
+
3.
4.
Position sill button lock rod and connect to
latch.
5.
6.
7.
8.
Secure release cable in clip.
Connect multiplug to motor.
Fit water shedder to door.
Fit tail door trim casing.
+
door.
DOORS, REPAIRS, Trim casing - tail
REPAIRS 76-1-13
| Categories | Land Rover Defender, Land Rover Discovery II, Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 1999 |
| Download File |
|
| Document Type | Workshop Manual |
| Language | English |
| Product Name | Discovery Series II |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)