RESTRAINT SYSTEMS
Refit
DCU
CAUTION: The SRS diagnostic control unit
is a shock sensitive device and must be
handled with extreme care.
$% 76.74.06
1.
2.
Position DCU to body and connect multiplug.
Fit and tighten DCU Torx bolts to 10 Nm (7
lbf.ft).
WARNING: It is imperative that before any work
is undertaken on the SRS system the appropriate
information is read thoroughly.
3.
Fit centre console.
WARNING: Always disconnect both battery leads
before beginning work on the SRS system.
Disconnect the negative battery lead first. Never
reverse connect the battery.
l On manual gearbox models:
INTERIOR TRIM COMPONENTS,
REPAIRS, Console - centre - manual
models.
+
l On automatic gearbox models:
+
INTERIOR TRIM COMPONENTS,
Remove
1.
Remove the key from the starter switch.
Disconnect both battery leads, negative lead
first. Wait ten minutes before starting work.
Remove centre console.
REPAIRS, Console - centre - automatic
models.
4. Connect battery leads, earth lead last.
2.
l On manual gearbox models:
+
INTERIOR TRIM COMPONENTS,
REPAIRS, Console - centre - manual
models.
l On automatic gearbox models:
+
INTERIOR TRIM COMPONENTS,
REPAIRS, Console - centre - automatic
models.
3.
4.
Disconnect multiplug from DCU.
Remove 3 Torx bolts securing DCU to body and
remove DCU.
CAUTION: The SRS diagnostic control unit
is a non-serviceable component and no
attempt should be made to repair or modify
the unit.
75-24
REPAIRS
| Categories | Land Rover Defender, Land Rover Discovery II, Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 1999 |
| Download File |
|
| Document Type | Workshop Manual |
| Language | English |
| Product Name | Discovery Series II |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)