CLUTCH - V8
ADJUSTMENTS
Clutch hydraulic system - bleed
$% 33.15.01
CAUTION: Ensure the fluid in the reservoir is
maintained between the minimum and maximum
levels throughout the bleed procedure using new
brake fluid.
CAUTION: Brake fluid will damage paint finished
surfaces. If spilled, immediately remove fluid and
clean area with water.
Bleeding
1.
2.
Top up reservoir.
Raise the front of the vehicle.
WARNING: Do not work on or under a
vehicle supported only by a jack. Always
support the vehicle on safety stands.
3.
4.
Connect tube to bleed screw on clutch slave
cylinder and submerge free end in a clear
container containing brake fluid.
Loosen bleed screw, then apply steady
pressure to the clutch pedal, depressing it
through its full stroke. Allow the pedal to return
unassisted.
5.
6.
7.
Repeat the procedure until a flow of clean, air-
free fluid is purged into the container.
Hold the pedal to the floor and tighten the
clutch bleed screw to 9 Nm (7 lbf.ft).
Check and top up reservoir.
CAUTION: Never re-use fluid that has been
bled from the system.
8.
Remove stands and lower the vehicle.
ADJUSTMENTS 33-2-11
| Categories | Land Rover Defender, Land Rover Discovery II, Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 1999 |
| Download File |
|
| Document Type | Workshop Manual |
| Language | English |
| Product Name | Discovery Series II |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)