AUTOMATIC GEARBOX - ZF4HP22 - 24
Refit
Solenoids - shift control valves
(MV 1 & 2)
1. Clean MV2 shift control solenoid valve with lint
free cloth.
2.
3.
4.
5.
6.
7.
Position MV2 shift control solenoid valve to
valve body.
Position retaining fork, fit Torx screw and
tighten to 8 Nm (6 lbf.ft).
Connect multiplugs to both shift control
solenoid valves.
Clean lock-up solenoid valve assembly with a
lint-free cloth.
$% 44.15.45
Remove
1.
Remove valve body assembly.
AUTOMATIC GEARBOX - ZF4HP22
+
- 24, REPAIRS, Valve body assembly.
Position lock-up valve assembly, fit and tighten
Torx screws to 8 Nm (6 lbf.ft).
Fit valve body assembly.
+
AUTOMATIC GEARBOX - ZF4HP22
- 24, REPAIRS, Valve body assembly.
1
M44 1352
2.
Remove 3 Torx screws securing lock-up
solenoid valve assembly to valve body and
move solenoid aside.
NOTE: This is to gain access to remove Torx
screw and MV2 shift control valve.
M44 1353A
3.
4.
Note their fitted position and disconnect
multiplugs from shift control valves MV 1 and
MV 2.
Remove Torx screw and retaining fork securing
MV2 shift control solenoid valve to valve body.
Note that the tag on the retaining fork faces
towards the valve body.
5.
Remove shift control valve from valve body.
44-56
REPAIRS
| Categories | Land Rover Defender, Land Rover Discovery II, Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 1999 |
| Download File |
|
| Document Type | Workshop Manual |
| Language | English |
| Product Name | Discovery Series II |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)