SUNROOF
Refit
Sunroof - rear
$% 76.84.02
Remove
1. With assistance, fit sunroof frame and glass
assembly.
1.
Remove sunroof motor.
SUNROOF, REPAIRS, Motor -
+
sunroof.
2.
3.
4.
Position sunroof tray to roof and locate on front
edge and on rear location pin, arrowed in
illustration.
Fit Torx screws securing sunroof tray to frame
and tighten to 2 Nm (1.5 lbf.ft) in the order
shown.
Fit sunroof motor. Do not fit headlining at this
stage.
+ SUNROOF, REPAIRS, Motor -
2.
Models with rear A/C:
a Drill out 4 rivets securing rear centre duct to
roof.
b Release and remove rear centre duct.
c Drill out 2 rivets securing each upper side
duct to roof.
sunroof.
Models with rear A/C:
5.
a Fit upper side ducts and secure with rivets.
b Fit rear centre duct and secure with rivets.
Connect drain tubes to sunroof.
Check operation of sunroof.
Pour water over sunroof and check for water
leaks.
d Remove upper side ducts.
6.
7.
8.
9.
Fit headlining.
INTERIOR TRIM COMPONENTS,
+
REPAIRS, Headlining.
3.
4.
Disconnect drain tubes from sunroof tray.
Remove 14 screws securing sunroof tray to
sunroof frame.
5.
6.
Carefully remove sunroof tray.
With assistance, remove sunroof frame and
glass assembly.
76-6-16
REPAIRS
| Categories | Land Rover Defender, Land Rover Discovery II, Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 1999 |
| Download File |
|
| Document Type | Workshop Manual |
| Language | English |
| Product Name | Discovery Series II |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)