ENGINE - V8
Mounting - rear - LH
$% 12.45.07
Remove
1.
Raise vehicle on lift.
5.
6.
7.
8.
Remove nut securing mounting to body
bracket.
Remove nut securing mounting to mounting
bracket.
Remove 4 bolts securing mounting bracket to
gearbox.
Remove mounting and mounting bracket
assembly.
2.
3.
Remove 8 bolts securing rear cross member
and remove cross member.
Support transfer gearbox on jack.
9.
10.
Remove mounting rubber.
Remove heat shield, if fitted.
CAUTION: To prevent damage to
components, cushion the jack pad with a
block of wood or hard rubber.
Refit
1.
If fitted position heatshield, fit mounting rubber
to mounting bracket, fit nut but do not tighten.
Position mounting bracket assembly, fit bolts
securing mounting bracket to gearbox and
tighten to 85 Nm (63 lbf.ft).
2.
3.
4.
5.
6.
7.
Fit nut securing mounting to body bracket and
tighten to 48 Nm (35 lbf.ft).
Tighten nut securing mounting to gearbox
bracket to 48 Nm (35 lbf.ft).
Connect HO2S multiplug and secure to support
bracket.
Position rear cross member, fit bolts and
tighten to 26 Nm (19 lbf.ft).
Lower vehicle.
4.
Release and disconnect HO2S multiplug.
12-2-24
REPAIRS
| Categories | Land Rover Defender, Land Rover Discovery II, Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 1999 |
| Download File |
|
| Document Type | Workshop Manual |
| Language | English |
| Product Name | Discovery Series II |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)