ENGINE MANAGEMENT SYSTEM - V8
Plenum chamber
$% 19.22.46
Remove
Sensor - throttle position (TP)
$% 19.22.49
Remove
1.
Remove upper manifold gasket.
MANIFOLDS AND EXHAUST
+
SYSTEMS - V8, REPAIRS, Gasket - inlet
manifold - upper - Without Secondary Air
Injection.
1.
2.
Disconnect multiplug from TP sensor.
Remove 2 screws securing TP sensor to
throttle body.
3.
Remove TP sensor and discard 'O' ring.
Refit
1.
Clean TP sensor and throttle body mating
faces.
2.
Remove 2 bolts securing throttle cable
abutment bracket and remove bracket.
Remove breather hose adaptor.
Remove 4 bolts securing plenum chamber to
upper manifold and remove plenum chamber.
Collect plenum chamber gaskets.
2. Using a new 'O' ring, position TP sensor. Fit
screws and tighten to 2.2 Nm (1.6 lbf.ft).
3. Connect multiplug to TP sensor.
3.
4.
5.
Refit
1.
Clean plenum chamber and upper manifold
mating faces.
2.
3.
4.
5.
Using new gaskets, position plenum chamber
fit bolts and tighten to 22 Nm (16 lbf.ft).
Fit breather adaptor and tighten to 6 Nm (4.4
lbf.ft).
Position throttle cable abutment bracket, fit
bolts and tighten to 9 Nm (7 lbf.ft).
Fit upper manifold gasket.
+
MANIFOLDS AND EXHAUST
SYSTEMS - V8, REPAIRS, Gasket - inlet
manifold - upper - Without Secondary Air
Injection.
REPAIRS 18-2-91
| Categories | Land Rover Defender, Land Rover Discovery II, Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 1999 |
| Download File |
|
| Document Type | Workshop Manual |
| Language | English |
| Product Name | Discovery Series II |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)