1999 Land Rover Discovery Series II Workshop Manual

WIPERS AND WASHERS
Refit
Switch - wiper and washer - windscreen
1.  Fit new switch to bracket and secure with
screws.
2.
3.
Connect harness multiplug to switch.
Connect front wiper delay multiplug and fit
multiplug to switch bracket.
$% 84.15.34  
WARNING: It is imperative that before any work
is undertaken on the SRS system the appropriate
information is read thoroughly.
4.  Fit passive coil to column lock.
5.  Fit rotary coupler.
RESTRAINT SYSTEMS, REPAIRS,
+
Rotary coupler.
Remove
1.
Remove rotary coupler.
RESTRAINT SYSTEMS, REPAIRS,
+
Rotary coupler.
2.
3.
Release passive coil from steering column lock
and lower the coil without disconnecting the
harness.
Release front wiper delay multiplug from
column switch mounting  bracket and
disconnect from harness.
4.
5.
Disconnect harness multiplug from wiper
switch.
Remove 2 screws securing switch, carefully
raise edge of switch bracket to  clear location
peg and remove switch.
84-26
REPAIRS
Product Specification
CategoriesLand Rover Defender, Land Rover Discovery II, Range Rover
Tags
Model Year1999
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 1529 pages
Document TypeWorkshop Manual
LanguageEnglish
Product NameDiscovery Series II
Product BrandLand Rover
Document File TypePDF
Publisherlandrover.com
Wikipedia's Pagehttp://en.wikipedia.org/wiki/Land_Rover
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field