ENGINE - V8
Refit
Mounting - front - RH
$% 12.45.03
1. Position heat shield.
2.
3.
Fit engine mounting ensuring dowel is located.
Lower the jack and engage engine mounting
studs in chassis.
4.
5.
Fit engine mounting nuts and tighten to 85 Nm
(63 lbf.ft).
Remove
1.
2.
3.
Release turnbuckles and remove battery cover.
Disconnect battery earth lead.
Raise front of vehicle.
Fit underbelly panel.
+
EXTERIOR FITTINGS, REPAIRS,
Panel - underbelly.
Remove stand(s) and lower vehicle.
Connect battery earth lead.
WARNING: Do not work on or under a
vehicle supported only by a jack. Always
support the vehicle on safety stands.
6.
7.
8.
Fit battery cover and secure turnbuckles.
4.
5.
Remove underbelly panel.
EXTERIOR FITTINGS, REPAIRS,
Panel - underbelly.
Position a jack beneath the sump, and support
the engine on the jack.
+
CAUTION: To prevent damage to
components, cushion the jack pad with a
block of wood or hard rubber.
6.
7.
8.
Remove 2 nuts securing engine mountings to
chassis.
Remove nut securing RH mounting to cylinder
block.
Raise engine sufficiently to allow engine
mounting to be removed. Take care not to trap
any cables, pipes or harness.
Remove engine mounting.
9.
10.
Collect heat shield.
REPAIRS 12-2-23
| Categories | Land Rover Defender, Land Rover Discovery II, Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 1999 |
| Download File |
|
| Document Type | Workshop Manual |
| Language | English |
| Product Name | Discovery Series II |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)