ENGINE - V8
8.
9.
Fit CKP sensor.
+
V8, REPAIRS, Sensor - crankshaft position
(CKP).
Clean clutch cover, drive plate and spigot bush
in end of crankshaft.
ENGINE MANAGEMENT SYSTEM -
10.
11.
Renew worn components as necessary.
If refitting existing drive plate, apply Molycote
FB 108 to splines.
12.
13.
Fit LRT-12-001 alignment tool to spigot bearing
in crankshaft.
Fit drive plate onto alignment tool, ensure side
marked 'flywheel side' is against flywheel.
Fit clutch cover and locate on dowels.
Fit clutch cover bolts and tighten in diagonal
sequence to 40 Nm (30 lbf.ft).
14.
15.
8.
Carefully remove oil seal from cylinder block to
avoid damage to seal location or running
surface on crankshaft.
Reassembly
1.
Ensure both seal location and running surface
on crankshaft are clean. Ensure that bolt holes
are clean and dry.
2.
3.
Lubricate replacement oil seal with engine oil.
Lubricate seal guide LRT-12-095 with engine
oil and position to crankshaft.
4.
5.
6.
7.
Fit new seal squarely onto crankshaft and
remove guide LRT-12-095.
Fit seal into location using tools LRT-12-091
and LRT-99-003.
Clean mating faces of flywheel and crankshaft,
dowel and dowel hole.
Fit flywheel to crankshaft and, working in a
diagonal sequence, tighten bolts to 78 Nm (58
lbf.ft).
OVERHAUL 12-2-51
| Categories | Land Rover Defender, Land Rover Discovery II, Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 1999 |
| Download File |
|
| Document Type | Workshop Manual |
| Language | English |
| Product Name | Discovery Series II |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)