1995 Land Rover Range Rover Classic Workshop Manual

12
ENGINE
CRANKSHAFT PULLEY ASSEMBLY
Service repair no - 12.21.01
FRONT COVER OIL SEAL - RENEW
Service repair no - 12.21.14
1.
Remove viscous coupling.  See COOLING
SYSTEM, Repair,  Viscous Coupling, Fan
Blades, Pulley and Fan Cowl
Remove drive belt.  See  Drive Belt
Raise vehicle on ramp [hoist].
1.  Remove crankshaft pulley.  See  Crankshaft
Pulley Assembly Do not remove pulleys.
2.  Remove eight screws and remove mud
excluder.
3.  Fit button of 18G1328 to crankshaft, fit extractor
to seal.
4.  Turn centre bolt of extractor to remove seal.
5.  Remove seal from extractor.
6.  Clean seal seating.
7.  Lubricate outside diameter of seal.
8.  Locate seal in front cover.
9.  Fit adaptor 18G1291/5 to 18G1291/4.
10.  Fit tool to seal.
11.  Fit and tighten centre bolt to crankshaft, tighten
centre locknut to seat seal.
12.  Slacken locknut and remove tool.
13.  Lubricate seal lip.
14.  Fit mud excluder and tighten screws.
2.
3.
4.
5.
6.
Remove bell housing bottom cover.
Remove engine undertray.
With assistance to stop flywheel rotation, remove
crankshaft pulley assembly retaining bolt.
Remove crankshaft pulley assembly.
If required: Place assembly in vice and remove
pulley.
Fit pulley to torsional vibration damper.
Lubricate seal face of assembly.
Fit pulley assembly.
7.
8.
9.
10.
11.
12.
With assistance to stop flywheel rotation, fit
retaining bolt.  Tighten to 280 Nm.
Reverse removal procedure. 1 to 5.
13.
15.
Fit crankshaft pulley assembly.
8
REPAIR
Product Specification
CategoriesLand Rover, Range Rover
Tags
Model Year1995
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 767 pages
Document TypeOwners Manual
LanguageEnglish
Product NameRange Rover Classic
Product BrandLand Rover
Document File TypePDF
Publisherlandrover.com
Wikipedia's Pagehttp://en.wikipedia.org/wiki/Land_Rover
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field