CHASSIS AND BODY
Refit
FRONT SPOILER
CAUTION: When refitting avoid trapping of
electrical wiring.
Service repair no - 76.10.46
The spoiler will reduce the vehicle approach angle by
approximately 10°. Where the vehicle is expected to
perform on rough or hilly terrain, it is advisable to
remove the spoiler assembly to prevent possible
damage from ground contact.
36.
37.
Reverse removal procedure.
With assistance: Position dash panel and
connect dash harness multiplugs to fusebox and
main harness.
38.
39.
Reverse removal procedure. Ensure dash panel
upper bracket studs are located before the 4
lower brackets.
Reverse removal procedure. Disconnect
glovebox switch Lucars to ease fitting of relay
bracket.
Remove
1. Raise and support front of vehicle on safety
stands.
2. Remove engine undertray.
3.
Remove two screws with spring washers
securing centre of front spoiler and number
plate.
4.
5.
Remove number plate.
Remove four nuts with spring washers located
behind front bumper above auxiliary lamps.
Remove two bolts, nuts and washers securing
outer edges of spoiler to front wing[fender]s.
Release auxiliary lamp multiplugs from clips and
disconnect the multiplugs.
Remove front spoiler assembly. Do not carry
out further dismantling if component is
removed for access only.
6.
7.
8.
9.
10.
11.
Remove nut retaining each auxiliary lamp.
Remove 2 auxiliary lamps.
Transfer components removed to new spoiler.
Refit
12.
Reverse removal procedure.
REPAIR
45
| Categories | Land Rover, Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 1995 |
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Name | Range Rover Classic |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)