STEERING
Remove
Refit
1.
2.
Disconnect battery negative lead.
10. Recheck road wheels are positioned straight
ahead.
11. Position steering wheel to column, feed harness
through wheel hub.
12. Remove adhesive tape securing rotary coupler.
13. Locate rotary coupler drive pegs and indicator
switch self-cancel pegs in steering wheel hub,
push wheel fully onto taper.
Position road wheels straight ahead so steering
wheel can be correctly re-assembled.
Airbag fitted: Remove air bag. See
SUPPLEMENTARY RESTRAINT SYSTEM,
Repair, Driver’s Airbag Module
3.
4.
Remove trim pad from steering wheel,
disconnect Lucars from horn button.
14.
15.
16.
Fit steering wheel nut. Tighten to 50 Nm.
Connect rotary coupler multiplug.
Non airbag module: Fit horn push assembly,
connect Lucars to horn button, secure harness
in clip.
17.
18.
Fit airbag module - if fitted. See
SUPPLEMENTARY RESTRAINT SYSTEM,
Repair, Driver’s Airbag Module
Reconnect battery negative lead.
5.
6.
7.
Disconnect rotary coupler multiplug.
Loosen but do not remove retaining nut.
Release steering wheel from taper, remove
retaining nut and washer.
8.
9.
Release harness from retaining clip.
Withdraw steering wheel whilst at the same time
feeding harness through wheel hub.
CAUTION: Prevent rotation of rotary
coupler once steering wheel is removed.
Secure in position with adhesive tape.
NOTE: Do not carry out further
dismantling if component is removed for
access only.
REPAIR
11
| Categories | Land Rover, Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 1995 |
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Name | Range Rover Classic |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)