44
AUTOMATIC GEARBOX
REPLACING PUMP
4. Remove bell housing and pump assembly from
gearbox case, discard gasket.
Service repair no - 44.32.01
5. Remove eight bolts on rear of pump.
6.
Screw in two bolts,diagonally opposite each
other, tap lightly using a soft headed mallet to
free pump assembly from intermediate plate.
1.
2.
Remove gearbox and transfer box assembly.
See ZF Auto with Borg Warner Transfer
Gearbox
Place gearbox on bench. Remove torque
converter using torque converter handles
18G1501,
taking care not to damage torque
converter/oil pump housing oil seal.
7.
8.
Fit new pump assembly, aligning dowel with hole
in intermediate plate, press pump housing home.
Secure pump housing to intermediate plate
using eight hexagonal bolts and. Tighten to 10
Nm.
3.
Remove twelve bolts (inner ring pattern).
9. Place bell housing and intermediate plate
assembly on bench, front face up. Using oil
pump rotation sleeve LST111, check that pump
gears rotate freely.
10.
Before replacing intermediate plate/bell housing
assembly check that thrust washer and axial
cage are seated on A clutch housing.
Place new gasket and disc washer onto bell
housing and intermediate plate assembly using
a Petroleum Jelly.
11.
12.
Fit bell housing and intermediate plate assembly,
tighten twelve bolts to 46 Nm.
20
REPAIR
| Categories | Land Rover, Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 1995 |
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Name | Range Rover Classic |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)