1995 Land Rover Range Rover Classic Workshop Manual

HEATING AND VENTILATION
Air direction
RESISTOR UNIT
Service repair no - 80.20.17
Remove
3.
4.
5.
6.
Set control fully clockwise
Release outer cable from 2 clips on unit.
Release cable from stud on flap lever.
Remove control cable from control lever.
1.
Open glove box, manoeuvre side springs
through cut-outs and lower lid.
Temperature
7.
Set RH control fully clockwise, LH control fully
anti-clockwise
8.
9.
10.
Release outer cable from 2 clips on unit.
Release cable from stud on flap lever.
Remove control cable from control lever.
2.
3.
Remove 2 screws securing resistor unit to
trunking.
Disconnect multiplug and remove resistor unit.
Refit
11.
Refit
4.
Reverse removal procedure. Check the
satisfactory function of the controls before fitting
louvre vent panel.
Reverse removal procedure.
REPAIR
3
Product Specification
CategoriesLand Rover, Range Rover
Tags
Model Year1995
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 767 pages
Document TypeOwners Manual
LanguageEnglish
Product NameRange Rover Classic
Product BrandLand Rover
Document File TypePDF
Publisherlandrover.com
Wikipedia's Pagehttp://en.wikipedia.org/wiki/Land_Rover
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)
Submit your review (optional)
(will not be displayed)
12345
* Required Field