1995 Land Rover Range Rover Classic Workshop Manual

ELECTRICAL
ALARM HORN
GEAR SELECTOR-INTERLOCK
Interlock solenoid
Remove
Service repair no - 86.77.10
Remove
1.
Remove decker panel.  See CHASSIS AND
BODY, Repair,  Decker Panel
1.  Disconnect battery negative lead.
2.  Remove gear selector head and illumination
panel.  See CHASSIS AND BODY, Repair,
Centre Console
2.
3.
4.
Disconnect two Lucar connectors.
Remove single nut securing horn.
Remove horn.
3.  Disconnect electrical multiplug.
4.
5.
6.
Remove screws and lift gear selector
mechanism above housing.
Remove screws from microswitch support
bracket.
Remove screws and separate side cover from
housing.
Refit
5.
Reverse removal procedure.
7.
8.
9.
Disconnect wiring solenoid to multiplug.
Remove circlip and retainer plate.
Remove clip and centre sleeve.
Refit clip into groove on spindle and lever
against it to remove solenoid from housing.
10.
REPAIR
37
Product Specification
CategoriesLand Rover, Range Rover
Tags
Model Year1995
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 767 pages
Document TypeOwners Manual
LanguageEnglish
Product NameRange Rover Classic
Product BrandLand Rover
Document File TypePDF
Publisherlandrover.com
Wikipedia's Pagehttp://en.wikipedia.org/wiki/Land_Rover
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field