BORG WARNER
23.
24.
25.
Fit the snap ring with the stepped ends adjacent
to the selector shaft bore.
Turn the rear cover over and fit the circlip to
retain the sun gear shaft.
Remove any previous sealant from the end cap.
Apply Dow Corning 732 silicon sealant or a
suitable equivalent to the outside diameter of the
rear cover, evenly tap the cap into position.
Selector fork
- Dismantle and inspection
1. Remove the retaining clip and separate the fork
from the arm.
2. Detach the two nylon slippers from the selector
fork feet and discard.
3. Thoroughly clean all components.
4.
Examine the fork, arm and pivot pin for wear.
Renew as necessary.
5.
Remove the ’O’ ring and discard. Examine the
shaft and lever for wear and damage, renew as
necessary.
6.
Examine the selector sleeve teeth and internal
splines for damage and wear. Renew as
necessary.
26.
If necessary re - position the filter on the oil pick
-
up pipe until the lug on the filter can be pushed
into the slot in the rear cover.
OVERHAUL
11
| Categories | Land Rover, Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 1995 |
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Name | Range Rover Classic |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)