ELECTRICAL
FRONT SEAT - MOTORS
Service repair no - 86.75.06
Remove
FRONT SEAT - SWITCHES
Service repair no - 86.75.03
Remove
Four electric motors, mounted beneath each front
seat, control fore and aft movement, cushion height
front and rear, and angle of recline. Adjustment is
possible with either front door open, or with ignition
switched ON.
1. Disconnect battery negative lead.
2. Pry two finger tip controls from switch housing.
3. Removing switch housing cover by lightly
depressing sides of cover to disengage clips,
remove diaphragm.
4.
Remove two crosshead screws and washers.
Lift switch assembly to gain access to two
multi-plugs.
1.
2.
3.
4.
Position seat to give access to motors.
Disconnect battery negative lead.
Remove seat base trim.
Remove two securing screws from each side of
required motor.
5. Disconnect multiplugs, remove switch assembly.
5.
6.
7.
Remove motor from mounting.
Disconnect drive cables by unscrewing ferrule.
Disconnect wires from multi-plug, remove motor.
Refit
8.
9.
Reverse removal procedure.
Check seat adjustment for correct operation.
Refit
6.
Reverse removal procedure.
NOTE: If switch housing removal is
required it is necessary to remove seat to
gain access to two securing screws. See
CHASSIS AND BODY, Repair, Front Seat
Electrical
REPAIR
31
| Categories | Land Rover, Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 1995 |
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Name | Range Rover Classic |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)