1995 Land Rover Range Rover Classic Workshop Manual

51
REAR AXLE AND FINAL DRIVE
48.
Repeat on other bearing bore. Add readings
then halve sum to obtain mean reading. Note
whether trace pin has moved up or down from
zero.
Bearing pre-load adjustment
52.  Remove the pinion flange, pinion, outer bearing
and spacer.
A.
Where trace pin moves down, reading is
equal to thickness of shims to remove, to
bring pinion to nominal.
Where trace pin moves up, reading is
equal to thickness of shims to add, to bring
pinion to nominal.
53.  Slide new shim, of same thickness as original
(bearing pre-load) into position on pinion shaft. If
fitting a new shim use thickest shim 2.155 mm.
54.  Fit pinion to pinion housing and fit outer bearing
and spacer (front differential only).
B.
55.  Fit driving flange, washer and nut.
56.
Do not fit oil seal at this stage.
49.
50.
Before adjusting shim thickness: check pinion
face marking. If a plus (+) figure, subtract in
thousandths of an inch from shim thickness
figure.
If pinion has a minus (-) figure, add amount to
shim thickness figure.
Adjust shim thickness under pinion head bearing
track as necessary.
INCH
MM
.001
.002
.003
.004
.005
.006
.007
.008
.009
.010
=
=
=
=
=
=
=
=
=
=
.025
.05
.075
.10
.125
.15
.175
.20
.225
.25
NOTE: Where dial indicator is metric
conversion must be made to inches when
measuring and selecting shims.
57.  Tighten pinion flange nut to 130 Nm.  Force to
rotate pinion shaft is 3Nm using new bearings.
Change shim as necessary to obtain reading.
Thicker shim will reduce pre-load. Thinner shim
will increase pre-load.
51.
Recheck pinion height setting. If setting is
correct, mean reading of dial gauge will agree
with figure marked on pinion end face.
For example, with end face marking of +3, dial
gauge reading should indicate pinion is +0.003
in.
NOTE: If using original bedded in
bearings, pre-load figure is 1.5 Nm.
58.
Remove pinion flange.
6
OVERHAUL
Product Specification
CategoriesLand Rover, Range Rover
Tags
Model Year1995
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 767 pages
Document TypeOwners Manual
LanguageEnglish
Product NameRange Rover Classic
Product BrandLand Rover
Document File TypePDF
Publisherlandrover.com
Wikipedia's Pagehttp://en.wikipedia.org/wiki/Land_Rover
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field