1995 Land Rover Range Rover Classic Workshop Manual

19
FUEL SYSTEM
EGR THROTTLE POSITION SENSOR
Service repair no - 19.30.14
Remove
INJECTORS
Service repair no - 19.60.10
Remove
1.
2.
Remove 2 screws securing throttle position
sensor mounting plate to injection pump.
Disconnect throttle position sensor multiplug
from harness.
1.  Remove oil filler cap and remove sound
deadening pad from top of engine.
2.  Remove high pressure pipe from relevant
injector and injection pump.
3.
Remove throttle position sensor assembly.
3.  Disconnect spill return hose(s) from injector.
4.
Plug pipes and injector connections to prevent
the ingress of dirt and foreign matter.
Remove nut securing injector clamp plate to
cylinder head.
Refit
4.
5.
Locate throttle position sensor assembly on
injection pump and fit and tighten screws.
Connect multiplug.
Adjust throttle position sensor.  See
Adjustment,  EGR Throttle Position sensor
6.  Remove injector.
5.
6.
Refit
7.
Reverse removal procedure. Renew copper
washer on injector. Tighten injector clamp plate
nut to 25 Nm.
10
REPAIR
Product Specification
CategoriesLand Rover, Range Rover
Tags
Model Year1995
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 767 pages
Document TypeOwners Manual
LanguageEnglish
Product NameRange Rover Classic
Product BrandLand Rover
Document File TypePDF
Publisherlandrover.com
Wikipedia's Pagehttp://en.wikipedia.org/wiki/Land_Rover
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field