76
CHASSIS AND BODY
REAR CORNER PANEL AND WING
Service repair no - 76.10.20 / 76.10.27
Remove
5. Remove rear lamp assembly. See
ELECTRICAL, Repair, Tail Lamp Assembly
6. Drill out pop rivets securing corner panel to
tailgate frame.
7. Remove 2 nuts and bolts securing wing[fender]
to ’D’ post, located beneath wheel arch.
8.
Loosen nut and bolt retaining mud-flap bracket
to wing[fender].
1.
2.
If applicable, remove 3 filler tube screws and fuel
filler flap. See Fuel Filler Flap
Remove load space cover and spare wheel.
9. Remove 5 screws securing wing[fender] to
bodyside panel. To access screw adjacent to ’D’
post, fold rear seat forward and remove seat
locking mechanism housing.
10.
11.
Remove rear wing[fender] with corner panel.
Remove 7 bolts, plain and spring washers
securing wing[fender] to corner panel.
Refit
12.
Assemble corner panel to rear wing[fender] with
bolts. Align panels before tightening.
13.
14.
Coat underside of panels with body protection.
Fit assembly to vehicle. Align door shut face to
wing[fender] edge and corner panel to tailgate,
before tightening screws and fitting pop rivets.
Reverse removal procedure.
15.
3.
4.
Remove 2 nuts and washers securing bumper
end cap to corner panel.
Remove bolt securing end cap to bumper.
16
REPAIR
| Categories | Land Rover, Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 1995 |
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Name | Range Rover Classic |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)