CHASSIS AND BODY
FRONT DOOR LOCK, OUTSIDE AND INSIDE
DOOR RELEASE HANDLES
10. Remove screws securing sill button to door.
Remove sill button from control rod.
11.
12.
Remove door lock by removing three screws as
shown.
Withdraw lock through cut out below.
Service repair no - 76.37.12
Remove
Continue for removal of outside release handle.
1.
Remove trim panel. See Front Door Trim
Panel
13. Remove nuts, shakeproof washers and retaining
bracket.
14. Remove door release handle from outer panel.
2.
3.
Remove plastic vapour barrier sheet.
Remove window lift motor. See ELECTRICAL,
Repair, Window Lift Motor - Front Door
Remove door glass and regulator. See Front
Door Glass and Regulator
Remove door lock actuator. See ELECTRICAL,
Repair, Front Door Actuator Unit
Disconnect control rod from key operated lock.
Release metal clip at bottom of rod.
Disconnect control rod from outside door release
handle.
4.
5.
6.
7.
8.
Continue for removal of inside release handle.
15. Remove screws securing handle to door panel.
16. Withdraw handle with connecting rod attached.
Refit
17. Reverse removal procedure. 1 to 16.
Disconnect rod between door release handle
and door lock by releasing clip and pulling rod
out of connecting block.
9.
From inside door remove pin which secures
quadrant to inner panel. Remove quadrant.
REPAIR
25
| Categories | Land Rover, Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 1995 |
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Name | Range Rover Classic |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)