86
ELECTRICAL
WINDOW LIFT MOTOR - FRONT DOORS
Service repair no - 86.25.04
Remove
WINDOW LIFT MOTOR - REAR DOORS
Service repair no - 86.25.09
Remove
1.
2.
3.
4.
Ensure that side door glass is fully closed,
secure with adhesive tape.
Remove front door trim panel. See CHASSIS
AND BODY, Repair, Front Door Trim Panel
Peel back front top corner of plastic vapour
barrier to reveal window lift motor.
Release window lift motor wiring harness from
three retaining clips to allow harness to be pulled
out of opening at front of inner door panel.
Disconnect window lift motor multi-plug from
main door harness.
1. Ensure that side door glass is fully closed,
secure with adhesive tape.
2. Remove rear door trim panel. See CHASSIS
AND BODY, Repair, Rear Door Trim Panel
3. Carefully detach bottom half of vapour barrier to
reveal window lift motor.
4. Release motor wiring harness from retaining
clips.
5. Disconnect lift motor harness snap connections
from main door harness.
5.
6. Support motor, release three securing bolts.
7.
Remove lift motor from lower opening in inner
door panel.
6.
7.
Support motor, remove three securing bolts.
Remove motor through top front opening of door.
Refit
8.
Refit
Reverse removal procedure. 1 to 7.
8. Reverse removal procedure. 1 to 7.
NOTE: Ensure that drive gear is engaged
and correctly aligned with window lift
linkage before fitting securing bolts.
NOTE: Ensure that drive gear is engaged
and correctly aligned with window lift
linkage before fitting securing bolts.
26
REPAIR
| Categories | Land Rover, Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 1995 |
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Name | Range Rover Classic |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)