1995 Land Rover Range Rover Classic Workshop Manual

86
ELECTRICAL
IGNITION COIL
BULB REPLACEMENT
Service repair no - 86.35.32
Remove
For bulb type and rating refer to rating shown on the
bulb or bulb replacement list.  See GENERAL
SPECIFICATION DATA, Information,  Bulbs
1.
Disconnect battery negative lead.
HEADLAMP ASSEMBLY / SEALED BEAM UNIT
Service repair no - 86.40.02
Remove
1.
2.
Disconnect battery negative lead.
Remove radiator grille.  See CHASSIS AND
BODY, Repair,  Radiator Grille
Remove three screws and headlamp retaining
rim.
3.
2.
3.
Noting their fitted positions, disconnect electrical
leads from ignition coil.
Remove two bolts securing ignition coil clamp,
recover suppressor.
4.
Remove coil.
Refit
5.
Reverse removal procedure.
4.
5.
DO NOT disturb beam adjusting screws.
Withdraw sealed beam unit. Disconnect wiring
plug from rear of unit.
6.
Remove three securing screws, pry away
grommet. Remove headlamp bowl.
Refit
7.
Reverse removal procedure.
6
REPAIR
Product Specification
CategoriesLand Rover, Range Rover
Tags
Model Year1995
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 767 pages
Document TypeOwners Manual
LanguageEnglish
Product NameRange Rover Classic
Product BrandLand Rover
Document File TypePDF
Publisherlandrover.com
Wikipedia's Pagehttp://en.wikipedia.org/wiki/Land_Rover
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)
Submit your review (optional)
(will not be displayed)
12345
* Required Field