MFI
FUEL PRESSURE REGULATOR
Service repair no - 19.45.06
Remove
FUEL RAIL-INJECTORS R/H AND L/H
Service repair no - 19.60.04 - Rail
Service repair no - 19.60.01 - Injectors
Remove
1.
Depressurise fuel system. See Depressurising
Fuel System
1. Depressurise fuel system. See Depressurising
Fuel System
2. Disconnect battery negative lead.
3. Remove plenum chamber. See Plenum
Chamber
2.
3.
Disconnect battery negative lead.
Remove plenum chamber. See Plenum
Chamber
Release clip and disconnect fuel return hose
from regulator.
4.
4. Remove ram housing. See Ram Housing
5.
6.
Disconnect vacuum hose from regulator.
Remove 2 bolts securing pressure regulator to
fuel rail.
NOTE: Place cloth over ram tube openings
to prevent ingress of dirt.
7.
8.
Release regulator from fuel rail and withdraw.
Remove and discard ’O’ ring.
5. Loosen clip and disconnect fuel return hose from
regulator.
6.
7.
Loosen union and disconnect fuel supply hose
from fuel rail.
Disconnect multi-plug from fuel temperature
sensor.
8.
9.
Disconnect multi-plugs from injectors.
Remove four bolts securing fuel rail support
brackets to intake manifold. Lay injector
harnesses to one side.
Refit
9.
Lightly coat ’O’ ring with silicon grease 300 and
fit to regulator.
10.
11.
Reverse removal procedure.
Reconnect battery and pressurise fuel system.
Check there are no fuel leaks around regulator
connections.
REPAIR
7
| Categories | Land Rover, Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 1995 |
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Name | Range Rover Classic |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)