1995 Land Rover Range Rover Classic Workshop Manual

68
AIR SUSPENSION
AIR DRIER
Service repair no - 60.50.09
Remove
WARNING: Air suspension is pressurised
up to 10 bar. Dirt or grease must not enter
the system. Wear hand, ear and eye safety
standard protection when servicing system.
1.
2.
Remove air supply unit.  See  Air Supply Unit
Disconnect two air pipes from air drier.  See
Disconnect/Connect Air Pipe
8.
9.
Clean all components. Identify air pipe
connections.
Disconnect air pipe connections.  See
Disconnect/Connect Air Pipe
Seal all exposed ends Disconnect remaining
multiplug.
10.
11.
Remove air pipes and wiring harness from
assembly.
Remove air supply unit from vehicle.
Refit
12.
Reverse removal procedure. Tighten mounting
bolts to 24Nm.
3.  Seal drier connections to prevent moisture
13.
Leak test all disturbed connections.  See
Adjustment,  Leak Test Procedure
intake.
4.  Remove fixings.
5.
Refit
6.
Remove drier.
Inspect air pipes. If damaged fit new pipes. DO
NOT ATTEMPT TO TRIM DRIER PIPES.
Reverse removal procedure. Tighten nuts to
12Nm.
7.
8.
Leak test connections.  See Adjustment,  Leak
Test Procedure
10
REPAIR
Product Specification
CategoriesLand Rover, Range Rover
Tags
Model Year1995
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 767 pages
Document TypeOwners Manual
LanguageEnglish
Product NameRange Rover Classic
Product BrandLand Rover
Document File TypePDF
Publisherlandrover.com
Wikipedia's Pagehttp://en.wikipedia.org/wiki/Land_Rover
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field