CHASSIS AND BODY
FRONT DOOR GLASS AND REGULATOR
Service repair no - 76.31.01 / 76.31.45
Remove
7. Disengage lifting arm stud from upper lifting
channel. Remove window regulator through
opening in door panel.
8.
Remove exterior driving mirror.
1.
2.
Fully close window and secure with tape to
prevent window from dropping.
Remove trim panel. See Front Door Trim
Panel
3.
4.
Remove vapour barrier.
Remove window lift motor. See ELECTRICAL,
Repair, Window Lift Motor - Front Doors
9.
10.
Remove waist rail seal from top of door.
Remove bolt, shakeproof and plain washer from
both end faces of door which secure door frame.
Remove bolt, spring and plain washer from
recessed hole under mirror mounting plate.
Remove bolt spring and plain washer securing
each lower side of door frame.
11.
12.
5.
6.
Remove 4 window regulator retaining bolts with
shakeproof washers from door panel.
Remove 2 screws with shakeproof washers
retaining lower window lift channel. Slide
channel off stud.
13.
14.
15.
Remove glass and frame out of door panel.
Remove tape securing glass to frame.
Slide glass out of door frame.
Refit
16.
Reverse removal procedure. When fitting door
frame align to suit door opening. Then tighten
door frame securing bolts.
REPAIR
23
| Categories | Land Rover, Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 1995 |
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Name | Range Rover Classic |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)