1995 Land Rover Range Rover Classic Workshop Manual

57
STEERING
Refit
POWER STEERING PUMP - V8i
Service repair no - 57.20.14
6.
Position reservoir, connect feed and return
hoses and tighten clamps to 3 Nm.
Fit reservoir in clamp, tighten clamp bolt.
Fill reservoir to ’MAX’ mark on dipstick with
power steering fluid.  See LUBRICANTS,
FLUIDS AND CAPACITIES, Information,
Recommended Lubricants and Fluids
Fit undertray.
7.
8.
NOTE: The power steering pump is not
serviceable. Fit new pump if worn or
damaged.
Remove
9.
10.
Bleed power steering system.  See  Power
Steering System - Bleed
1.  Disconnect battery negative lead.
2.  Remove drive belt from steering pump.  See
ENGINE, Repair,  Drive Belt
3.
4.
Remove undertray.
Remove fan blades and viscous coupling.  See
COOLING SYSTEM, Repair,  Viscous
Coupling, Fan Blades, Pulley and Fan Cowl
Position drain tin beneath steering pump.
POWER STEERING PUMP DRIVE BELT
Service repair no - 57.20.02
5.
NOTE: For details of drive belt remove and
refit.  See ENGINE, Repair,  Drive Belt
6.
Using a 9 mm Allen key to restrain steering
pump pulley, remove 3 bolts securing pulley to
pump; remove pulley.
6
REPAIR
Product Specification
CategoriesLand Rover, Range Rover
Tags
Model Year1995
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 767 pages
Document TypeOwners Manual
LanguageEnglish
Product NameRange Rover Classic
Product BrandLand Rover
Document File TypePDF
Publisherlandrover.com
Wikipedia's Pagehttp://en.wikipedia.org/wiki/Land_Rover
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field