1995 Land Rover Range Rover Classic Workshop Manual

26
COOLING SYSTEM
RANGE ROVER
3.
Disconnect bottom hose from radiator. Drain
coolant into a clean container. Reconnect bottom
hose, re-tighten hose clamp.
5.  Pour correct solution of water and anti-freeze
into expansion tank until radiator is full.
6.  Start engine, run it until normal operating
temperature is attained, topping up as
necessary.
7.
Refit radiator filler plug and ’O’ ring, with new ’O’
ring if required. Tighten to 6 Nm.
8.
9.
Fit expansion tank filler cap.
Allow engine to cool, check coolant level. Finally
top up expansion tank until level reaches seam
of expansion tank.
NOTE: It is not possible to drain all coolant
retained in heater system. It is not
desirable to flush through system, after
draining.
4.
Remove engine drain plugs, one each side of
cylinder block, beneath exhaust manifolds. Drain
coolant, refit and tighten plugs.
2
ADJUSTMENT
Product Specification
CategoriesLand Rover, Range Rover
Tags
Model Year1995
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 767 pages
Document TypeOwners Manual
LanguageEnglish
Product NameRange Rover Classic
Product BrandLand Rover
Document File TypePDF
Publisherlandrover.com
Wikipedia's Pagehttp://en.wikipedia.org/wiki/Land_Rover
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field