57
STEERING
DROP ARM
Service repair no - 57.50.14
Remove
1.
Place vehicle on a hoist, or support front axle on
axle stands.
7.
8.
Remove bulb holder from steering column lock
shroud.
Tap head of shear bolts anti-clockwise to release
them.
9.
10.
11.
Remove and discard shear bolts.
Detach saddle.
Remove steering column lock assembly.
Refit
12.
2. Disconnect drag link ball joint from drop arm,
using extractor LRT-57-018.
Position steering lock saddle on column, locating
spigot in hole provided.
13.
14.
15.
16.
Place lower lock assembly into column.
Fit but do not fully tighten new shear bolts.
Connect multiplugs.
Insert bulb holder into steering column lock
shroud.
17.
18.
Reconnect battery negative lead.
Check steering column lock for correct
operation, tighten shear bolts until heads shear
off.
19.
Fit steering column shroud. See Steering
Column Shroud
20.
21.
If fitted - fit knee bolster, fit and tighten screws.
Raise driver’s access panel, secure turnbuckles.
16
REPAIR
| Categories | Land Rover, Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 1995 |
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Name | Range Rover Classic |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)