76
CHASSIS AND BODY
GLASS SUNROOF COMPLETE ASSEMBLY
Service repair no - 76.82.59
Remove
Refit
1.
2.
Open sunroof rearwards. Disconnect battery
negative lead.
7. Manually close sunroof. See Manual
Operation
Remove switchplate and disconnect two
multiplugs from switch and courtesy light.
Remove headlining. See Headlining
Remove four clips and disconnect drain tubes.
Disconnect multiplug from control unit to main
harness.
8. Lift complete sunroof assembly to roof panel.
9. Fit loosely eight retaining nuts and washers and
two bolts.
10. Ensure closed sunroof fits equally positioned in
roof panel aperture. Tighten retaining nuts and
bolts, recheck fit.
3.
4.
5.
6.
With assistance remove eight nuts and washers
and two bolts. Lower sunroof assembly remove
through rear of vehicle.
11. Connect electrical multiplugs to main harness
and sunroof switch.
12. Check sunroof operates correctly and leave in
open position.
13.
14.
Disconnect sunroof switch
Fit drain tubes with retaining clips.Water test to
ensure watertight seal.
15.
16.
Fit headlining and sunroof trim.
Reconnect electrical multiplugs to sunroof switch
and interior light then fit switchplate.
Close sunroof and draw sunshade.
17.
56
REPAIR
Product Specification
Categories | Land Rover, Range Rover |
---|---|
Tags | Land Rover |
Model Year | 1995 |
Download File |
|
Document Type | Owners Manual |
Language | English |
Product Name | Range Rover Classic |
Product Brand | Land Rover |
Document File Type | |
Publisher | landrover.com |
Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
Copyright | Attribution Non-commercial |