MFI
IDLE AIR CONTROL VALVE
Service repair no - 19.22.54
Remove
VEHICLE SPEED SENSOR
Service repair no - 88.30.14
The vehicle speed sensor is located in the LH side of
the transfer box.
1.
2.
3.
4.
Disconnect battery negative lead.
Disconnect multi-plug.
Unscrew valve from rear plenum chamber.
Remove washer.
Remove
1. Place vehicle on lift, apply parking brake.
2.
3.
Disconnect battery negative lead.
Raise lift, disconnect multiplug from vehicle
speed sensor.
4.
5.
Remove screw securing sensor to transfer box.
Remove vehicle speed sensor
Refit
5.
Refit
6.
Fit NEW sealing washer.
Reverse removal procedure.
NOTE: If same idle air control valve is
being refitted clean sealing compounds
from threads. Apply Loctite 241 to threads
of valve before reassembly.
6.
7.
Tighten valve to 20 Nm.
Reverse removal procedure.
REPAIR
3
| Categories | Land Rover, Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 1995 |
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Name | Range Rover Classic |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)