Tdi
FRONT COVER PLATE
Service repair no - 12.65.01
Remove
Refit
1.
2.
3.
4.
5.
Disconnect battery negative lead.
Drain coolant.
14. Refit in reverse order to removal using new
gaskets, fitting the securing bolts as shown in
illustration ST3475. Tighten to 25 Nm.
Remove top hose from radiator.
Remove inter-cooler to induction manifold hose.
Remove viscous coupling and fan. See
COOLING SYSTEM, Repair, Viscous
Coupling, Fan Blades, Pulley and Fan Cowl
Remove fan cowl.
Remove drive belt. See Drive Belt Renew
Remove crankshaft pulley. See Crankshaft
Pulley
6.
7.
8.
9.
Remove 14 bolts securing front cover plate,
noting top two bolts also retain thermostat hose
clips.
10.
11.
Remove cover plate complete with gasket.
Remove small gasket from centre bolt boss.
Seal replacement
12.
13.
Remove worn seal from cover and clean recess.
Support cover and fit new seal, open side fitted
into recess, using special tool LRT-12-077.
REPAIR
7
| Categories | Land Rover, Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 1995 |
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Name | Range Rover Classic |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)