84
WIPERS AND WASHERS
WIPER ARMS - WINDSCREEN
Service repair no - 85.15.01
Remove
WIPER ARM - TAILGATE
Service repair no - 84.35.01.
Remove
1.
2.
Hold back small spring clip which retains wiper
arm on shaft boss using a suitable tool.
Gently pry off wiper arm from shaft boss.
1. Lift wiper arm end cap to access wiper motor
shaft.
2. Remove wiper arm securing nut.
3.
Withdraw wiper arm from shaft.
Refit
Refit
3.
4.
Allow motor to move to ’park’ position.
Push arm on to boss, locating it on splines so
that wiper blades are clear of screen rail.
Ensure that spring retaining clip is located in
retaining groove on shaft boss.
4. Allow motor to move to ’park’ position.
5. Fit wiper arm to shaft,locating it on the splines so
that wiper blade is clear of screen surround.
6. Fit and tighten securing nut.
7. Push end cap back into position.
8. Check correct operation of wiper.
5.
6.
Operate wiper on a wet screen to ensure blades
do not over travel.
4
REPAIR
| Categories | Land Rover, Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 1995 |
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Name | Range Rover Classic |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)