1995 Land Rover Range Rover Classic Workshop Manual

51
REAR AXLE AND FINAL DRIVE
CROWN WHEEL/PINION BACKLASH
ADJUSTMENT
68.  Tighten left nut until it contacts bearing. Continue
turning until a backlash of 0,10 to 0,17 mm is
met. DO NOT loosen right nut otherwise bearing
preload will be affected.
69.  Fit locking fingers and roll pins. Align locking
finger with a slot.
63.
64.
Place differential housing in pinion housing.
Fit bearing caps and partly tighten bolts.
70.
Evenly tighten bearing cap bolts to 90 Nm.
71.
72.
Recheck crown wheel/pinion backlash.
Lubricate bearings and gears.
65.
66.
Fit bearing adjusting nuts.
Mesh crown wheel to pinion. Using service tool
LRT-54-508 loosen left bearing adjuster nut.
Tighten right nut until crown wheel/pinion
backlash is just removed.
67.
8
OVERHAUL
Product Specification
CategoriesLand Rover, Range Rover
Tags
Model Year1995
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 767 pages
Document TypeOwners Manual
LanguageEnglish
Product NameRange Rover Classic
Product BrandLand Rover
Document File TypePDF
Publisherlandrover.com
Wikipedia's Pagehttp://en.wikipedia.org/wiki/Land_Rover
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)
Submit your review (optional)
(will not be displayed)
12345
* Required Field