1995 Land Rover Range Rover Classic Workshop Manual

Tdi
VACUUM PUMP
Service repair no - 70.50.19
Remove
GENERATOR
Service repair no - 86.10.02
Remove
NOTE: To ease pump removal set engine
1.  Disconnect battery negative lead.
to T.D.C. on No.1 cylinder.
2.  Remove drive belt.  See  Drive Belt Renew
3.
Disconnect electrical leads from rear of
generator.
1.
2.
Disconnect battery negative lead.
Detach servo hose from vacuum pump.
4.  Remove securing bolt from bottom of generator.
5.
Remove long through bolt from top fixing and
withdraw generator.
3.
4.
Remove six bolts securing vacuum pump.
Detach pump complete with harness bracket.
Note location of bracket for refitting.
Refit
6.
Refit
Reverse removal procedure.
5.
6.
Clean mating faces of pump and block.
Loosely assemble pump to block with a new
gasket and with harness bracket located under
head of bolt noted during removal.
7.
Evenly tighten bolts, to depress pump plunger,
finally tightening to 25 Nm.
8.
9.
Connect vacuum hose and secure with clip.
Reconnect battery negative lead.
REPAIR
23
Product Specification
CategoriesLand Rover, Range Rover
Tags
Model Year1995
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 767 pages
Document TypeOwners Manual
LanguageEnglish
Product NameRange Rover Classic
Product BrandLand Rover
Document File TypePDF
Publisherlandrover.com
Wikipedia's Pagehttp://en.wikipedia.org/wiki/Land_Rover
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field