MFI
INERTIA FUEL SHUTOFF SWITCH
Service repair no - 18.30.35
ENGINE FUEL TEMPERATURE SENSOR
Service repair no - 19.22.08
Remove
The inertia fuel shutoff switch is located on the
bulkhead next to the washer reservoir under bonnet
[hood].
NOTE: Fuel leakage will not occur when
sensor is removed from fuel rail, therefore
it is not necessary to depressurise the fuel
system.
Remove
1.
2.
3.
Disconnect battery negative lead.
Disconnect multiplug from inertia switch.
Remove 2 screws securing inertia switch to
mounting bracket.
1. Disconnect battery negative lead.
2. Disconnect multi-plug from sensor.
3. Release sensor from fuel feed rail.
4.
Remove inertia switch.
Refit
Refit
5.
4.
Reverse removal procedure. Ensure sensor is
tightened securely in fuel rail.
Position inertia switch to mounting bracket and
secure with screws.
6.
7.
Connect multiplug to inertia switch.
Reconnect battery negative lead.
REPAIR
5
| Categories | Land Rover, Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 1995 |
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Name | Range Rover Classic |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)