76
CHASSIS AND BODY
FRONT DOOR
Refit
Service repair no - 76.28.07
Remove
9. Reverse removal procedure. Renew clips if worn
or distorted.
10. Open door, connect wiring plugs. Ensure they
locate above trim panel.
1.
2.
Disconnect battery negative lead.
Open door to be removed.
11. Check operation of door and lock. If necessary,
adjust door and striker plate.
Adjust
12.
13.
Adjust door by shims between hinge and door to
move door forward or rearward in opening.
Loosen 6 screws securing hinges to door to
adjust door up and down or in and out of
opening. Tighten to 25Nm.
14.
15.
Adjust door lock striker by adding and
subtracting spacing washers or moving in
required direction.
Note: If it is necessary to remove hinges from ’A’
post. Refit in exactly same position using same
thickness of shims.
3.
Remove 2 clips securing trim panel to side of
footwell.
Locate and disconnect door wiring plugs.
Disengage grommets either side of A’ post.
Feed wiring out.
4.
5.
6.
7.
Drive out roll pin from door check link.
Remove ’C’ clips from hinge pins.
WARNING: Instruction 8 MUST BE carried
out with assistance.
8.
Lift opened door off hinge pins.
22
REPAIR
| Categories | Land Rover, Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 1995 |
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Name | Range Rover Classic |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)