MAINTENANCE
CHECK/TOP UP TRANSFER GEARBOX OIL
RENEW FRONT AND REAR AXLE OIL
1.
Before topping up oil ensure that vehicle is level,
either on a ramp or on ground.
1. Vehicle must be level. Place container under
axle to be drained.
2.
3.
4.
Disconnect battery negative lead.
Clean immediate area around filler/level plug.
Remove plug and fill gearbox with recommended
grade of oil, until oil starts to seep from filler/level
hole.
Clean any previously applied sealant from
filler/level plug.
Apply Hylomar sealant to threads of plug and
refit plug. Tighten to 25 Nm.
2. Using a 13mm square drive wrench, remove
drain and filler/level plugs from axle. Allow oil to
drain completely. Clean and refit drain plug.
3. Inject new oil of recommended make and grade
until it reaches level hole. Clean and refit
filler/level plug and wipe away surplus oil.
5.
6.
7.
8.
Wipe away any surplus oil.
Reconnect battery negative lead.
CHECK/TOP UP FRONT AND REAR AXLE OIL
1.
2.
Vehicle must be level.
Using a 13mm square drive wrench, remove
filler/level plug from axle.
3.
If necessary inject new oil of recommended
make and grade until it reaches level hole. Clean
and refit filler/level plug and wipe away surplus
oil.
MAINTENANCE
15
| Categories | Land Rover, Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 1995 |
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Name | Range Rover Classic |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)