1995 Land Rover Range Rover Classic Workshop Manual

Tdi
TANK SENDER UNIT
8.  Disconnect the fuel pipes from the sender unit.
9.
Using special tool LST131 remove the locking
ring and withdraw the sender unit from the fuel
tank.
Service repair no - 88.25.32
WARNING: Ensure that the WARNINGS
and FUEL HANDLING PRECAUTIONS
given in Section 01 are adhered to before
carrying out the following operations.
Refit
10.  Fit the sender unit to the fuel tank and secure
with the locking ring.  Tighten to 45  to 50 Nm.
11.  Connect the fuel pipes to the sender unit.
Special tool - LST131
Remove
12.
Connect multi-plug to sender unit.
13.  Inspect the access panel seal to ensure that it is
satisfactory for further use, renew as necessary.
14.  Fit the access panel to the aperture in the floor
and secure with the screws.
15.  Reverse removal procedure. 1 to 5. Refit the
sound insulation and carpet.
1.
2.
3.
Disconnect battery negative lead.
Remove the rear carpet retainer.
Ease the carpet from under the lower trim panels
at the rear of the fold down seats.
4.
5.
Raise the carpet to expose the sound insulation.
Fold back the sound insulation to reveal the
access panel.
6.
7.
Remove the securing screws and detach the
access panel from the floor.
Disconnect the multi-plug from sender unit.
REPAIR
1
Product Specification
CategoriesLand Rover, Range Rover
Tags
Model Year1995
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 767 pages
Document TypeOwners Manual
LanguageEnglish
Product NameRange Rover Classic
Product BrandLand Rover
Document File TypePDF
Publisherlandrover.com
Wikipedia's Pagehttp://en.wikipedia.org/wiki/Land_Rover
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field