ZF
OIL SUMP GASKET
KICKDOWN CABLE LEAK
Service repair no - 44.24.05
Service repair no - 44.15.01
Remove
1.
Site vehicle on ramp. Disconnect battery
negative lead.
2.
3.
4.
5.
Drain gearbox oil. Remove oil level tube.
Remove six retaining plates and bolts.
Remove sump, discard gasket.
1. Site vehicle on ramp. Disconnect battery
negative lead.
2. Disconnect kickdown cable from engine.
3. Drain gearbox oil. Remove front exhaust
assembly and chassis cross member.
Inspect sump for damage. Replace if necessary.
4.
5.
6.
Remove oil level tube.
Remove six retaining plates and bolts.
Remove sump, discard gasket.
6.
7.
Fit new gasket to sump.
Refit sump. Fit six retaining plates tighten screws
to 10Nm.
8.
Reconnect oil filler level tube. Tighten to 70Nm.
Fit sump plug with new seal. Tighten to 10Nm.
Reconnect battery negative lead.
7. Loosen three bolts, remove oil screen.
8. Loosen thirteen remaining bolts, remove control
unit.
9. Locate selector cam, remove nipple, holding
kickdown cable from seat.
9.
10.
Add correct oil through filler/level tube. See
LUBRICANTS, FLUIDS AND CAPACITIES,
Information, Recommended Lubricants and
Fluids
11.
Ensure vehicle is on level ground with park
brake applied. Check oil level with engine at idle,
neutral selected after selecting each gear.
NOTE: If leak persists after fitting existing
oil pan - fit new oil pan.
REPAIR
5
| Categories | Land Rover, Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 1995 |
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Name | Range Rover Classic |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)