FRONT SUSPENSION
ANTI-ROLL [SWAY] BAR FRONT
Service repair no - 60.10.01
KEY
1.
2.
3.
4.
Anti-roll[sway] bar
Rubber bush
Strap
5. Nut and washer
6. Castellated nut and cotter pin
7. Ball joint link arm
Nut, bolt, washer
Remove
Refit
1.
2.
3.
Mark for reassembly position of rubber bushes
on anti- roll[sway] bar.
4. Position bushes on anti-roll[sway] bar.
LH side, joint in bush to the rear.
RH side, joint in bush to the front.
Remove four nuts, bolts and washers securing
two bush straps.
Remove nuts, bolts, washers and rubber bushes
from ball joint links and remove anti-roll[sway]
bar.
CAUTION: The bush bore is tapered and
must be fitted as indicated.
5.
Fit anti-roll[sway] bar with two straps. To ensure
correct fit angled sides of bar should point down
as shown. Loosely fit the bolts, washers and
Nyloc nuts.
6.
7.
Fit bolt, washers and rubber bushes. Using new
nuts fit anti-roll[sway] bar to ball joint links.
Tighten to 68Nm.
Tighten nuts securing straps to 30Nm
REPAIR
5
| Categories | Land Rover, Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 1995 |
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Name | Range Rover Classic |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)