76
CHASSIS AND BODY
REAR DOOR LOCK, OUTSIDE AND INSIDE DOOR
RELEASE HANDLES
11. Remove outside door release handle from outer
door panel.
12.
13.
14. Remove two screws securing sill locking button
to inner door panel and detach sill button from
bellcrank.
Remove two screws with plain washers securing
inside door release handle to inner door panel.
Remove handle with connecting rod attached.
Service repair no - 76.37.13
Remove
1.
2.
3.
Fully close window.
Disconnect battery negative lead.
Remove trim panel. See Rear Door - Trim
Panel
Sill locking bellcranks
4.
5.
Remove plastic vapour barrier sheet.
Disconnect inside door release control rod from
door lock.
Disconnect sill locking control rod from door lock
by releasing metal clip.
Disconnect control rod from outside door release
handle by pulling it out of plastic olive.
Remove door lock by removing two screws from
door shut face and single screw with shakeproof
washer on inside of door. Retrieve any spacing
washers which may be fitted.
15. Press out plastic locking pins from inner door
panel.
16. Release bellcranks from inner door panel and
unhook respective connecting rods.
17. Withdraw bellcranks from inner door panel.
6.
7.
8.
NOTE: When fitting bellcranks, locking
pins are entered into square insert from
outside and pressed in flush.
Refit
9.
Remove lock through upper rear opening of
panel.
18. Reverse removal procedure. 1 to 17.
10.
Remove two nuts with shakeproof washers and
retaining bracket securing outside door release
handle.
30
REPAIR
| Categories | Land Rover, Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 1995 |
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Name | Range Rover Classic |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)