75
SUPPLEMENTARY RESTRAINT SYSTEM
STEERING WHEEL
Service repair no - 57.60.01
Remove
1.
2.
Remove driver’s airbag module. See Driver’s
Airbag Module
Position steering wheel so the road wheels are
in the straight ahead position.
8.
9.
Disconnect harness connector from airbag
module.
Remove airbag module.
CAUTION: Store the airbag module in
accordance with the storage procedures
outlined in Description and Operation.
NOTE: If airbag module is to be replaced
the serial numbers must be recorded in
the vehicle service record.
3. Disconnect cruise control switch connector
(where fitted) from rotary coupler harness.
4. Release harnesses from clip on steering wheel.
Refit
5.
Remove steering wheel nut.
10.
11.
Reverse removal procedure.
6. Release steering wheel from column.
7. Feed harnesses through hole in steering wheel.
8. Remove steering wheel.
Connect harness connector to airbag module
with harness downwards (as shown at 8).
Position airbag module on steering wheel and
engage retained screws. Use special socket to
tighten screws to 8Nm.
12.
CAUTION: Prevent rotation of rotary
coupler once steering wheel is removed.
Secure in position with adhesive tape.
CAUTION: Take care not to cross thread
screws.
Refit
13.
Check Supplementary Restraint System using
9. Reverse removal procedure.
Testbook .
CAUTION: Ensure road wheels are straight
ahead before fitting steering wheel.
10.
Fit steering wheel ensuring the rotary coupler
lugs are correctly engaged.
11.
12.
Fit steering wheel nut. Tighten to 50Nm.
Refit driver’s airbag module. See Driver’s
Airbag Module
2
REPAIR
| Categories | Land Rover, Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 1995 |
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Name | Range Rover Classic |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)