68
AIR SUSPENSION
HEIGHT SENSOR
PRESSURE RELIEF VALVE
Service repair no - 60.50.31
Service repair no - 60.36.01 - Front
Service repair no - 64.36.01 - Rear
WARNING: Air suspension is pressurised
Remove
up to 10 bar. Dirt or grease must not enter
the system. Wear hand, ear and eye safety
standard protection when servicing system.
1.
2.
3.
Disconnect battery negative lead.
Remove wheel.
Disconnect height sensor multiplug.
Remove
1.
2.
Remove valve block. See Valve Block
Clean around pressure relief valve with a stiff
brush and soapy water.
4.
Remove height sensor lower link fixing.
CAUTION: Back height sensors have
longer lower link than the front sensors.
5.
6.
Remove height sensor fixings.
Remove height sensor.
Refit
3.
Refit
4.
Remove pressure relief valve.
7.
8.
Reverse removal instructions.
Recalibrate system. See Adjustment, System
Calibration - Height Sensor Datum
Attain standard ride height.
Coat threads of pressure relief valve with Loctite
572.
9.
5.
6.
Fit valve. Tighten to 12 Nm.
Reverse removal procedure.
8
REPAIR
| Categories | Land Rover, Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 1995 |
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Name | Range Rover Classic |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)